DTOS – Distribution Transformer Optimization Software
- Shortening the data input process with its user-friendly interface
- Possibility of round and obround design
- Reducing averagely 10% of material cost
- 100% customization according to manufacturer’s DNA
- Standard yoke and flat yoke core application possibilities
- Design optimization possibility with unlimited core sheet range
- Optimization of core with different bandwidth combinations
- If requested, automatic "ovality ratio" limitation in accordance with short circuit proof
- Considering of induction and sound level limitations
- Automatic design possibilities with different step-lap combination (3x2 – 5x1 – 7x1)
- Automatic calculation of appropriate No-Load and Load Losses by considering the limitation of Efficiency and Peak Efficiency Index
- Automatic calculation of tender winning No-Load and Load Losses by considering the capitilization formula
- Consideration of current density limitation by algorithm
- Automatic design possibility with foils with different conductivity values
- Automatic design possibility with axial or radial parallel foils
- Automatic choice of combination of optimal parallel flat wires
- Automatic design function with different oil types
- Automatic design with U and L type of core clamp structure
- On HV side, automatic design possibility with 2 axial parallel round for automatic winding machines
- Automatic design possibilites with wire flattening on the HV side
- Using standard foils of customer for optimization
- Optimization possibilities with fixed parameters (LV number of turns, LV wire, HV wire, core, etc.)
- Hermetically sealed, with expansion tank, air cushion design options
- Tank optimization with maximum internal pressure limitations
- Design optimization according to maximum dimensional limitations
- Automatic optimization possibilities for Dual LV and Dual HV transformers
- Automatic optimization possibilities for 12 pulse transformers
- Automatic preparation of production working instructions
- Human-independent design of transformers (batch optimization)
- Analyzing the transformer results with machine learning system and determining the production tolerances automatically by the algorithm
- If requested, automatically transferring information from the design software to the existing ERP system as an export file.
- Medium power transformer design
- Parallel and serial foil usage integration
- Extra design analysis like short circuit forces, harmonics, inrush currents, over load, voltage drop analysis etc.
- Container optimization
- Optimization for maximum final dimensions
- OLTC – Main/Coare/Fine arrangement integration
- Optimization according to efficiency and PEI values
- Optimization with three axial round wire
- Foil-foil design integration